Designed by craftsmen.
Tested by riders.

The OAK Meteor Crank Set has your back when you’re riding past your comfort zone and you need to 100 % rely on your components.

Built for brutal hits, massive drops, and the gnarliest riders out there.

The Meteor is bombproof, ultra-reliable, and precisely manufactured, while still turning heads with its clean, aggressive look. The cranks ensure a centered and secure bike position while giving plenty of pedal clearance for uphills.

Over the years, we’ve seen carbon and aluminum cranks fail under serious use. So OAK set out to build the crank they would trust on their own bikes. In the lab, they hammered the Meteor with extreme loads, fine-tuning the shape to achieve a perfect balance of strength and weight. Since development began in 2021, they had our heaviest, most aggressive test riders thrash it - and they are convinced: the OAK Meteor is the crank riders want to ride.

No carbon. No cutouts. No gimmicks. Just beautifully machined billet aluminium.

Just pure, purpose-built strength for riders who go all-in - and want gear that’s made to last a lifetime.

Currently there is approximately a 3 week wait time for delivery due to popularity.

COMPATIBILTY

Standard spindle length:
• Bikes with 68 mm or 73 mm threaded or PF89,5 or PF92 BBs
• 168 mm Q-Factor
• 52 mm chainline (3 mm offset chainring)

Wide spindle length
• Bikes with 73 mm threaded and PF92 BBs
• 173 mm Q-Factor
• 55 mm chainline (3 mm offset chainring)
 
DH spindle length
• Downhill or Enduro bikes with 83 mm threaded BBs and PF107 BBs
• 181 mm Q-Factor

SCOPE OF DELIVERY

1x Crank arm 165/155 mm NDS
1x Crank arm 165/155 mm DS
1x Spinde Standard/Wide/DH
2x Ejecter Cap (black with raw Crank; raw with black Crank)
1x Preload ring
2x Mounting screw M18
2x Washer
2x Pedal washer
1x Cylinder screw M3x10
1x OAK hard case
1x OAK sticker pack

CO2-neutral shipping in environmentally friendly packaging.

WEIGHT
Entire set:
MTB Standard - 155 mm: 617,4 g
MTB Standard - 165 mm: 637,4 g

MTB Wide - 155 mm: 622,9 g
MTB Wide - 165 mm: 642,9 g

MTB DH - 155 mm: 629,5 g
MTB DH - 165 mm: 649,5 g

MANUFACTURING AND MATERIALS
Made in Germany
Aerospace Aluminium
100% CNC-milled

OAK COMPONENTS TRL brake levers are suitable for TRP brake systems - set of 2 pieces

The OAK COMPONENTS TRL provides a performance boost with the larger adjustment range and improved ergonomics. The topology-optimised construction makes it a stable and reliable companion that easily withstands falls.

The lever can be placed significantly closer to the handlebars than a standard lever and gives you an incomparably precise braking feel.

Brake levers come in black, lunar grey, raw and copper.

IF A SPECIFIC COLOUR IS SOLD OUT: Please contact us as we will reserve a pair in our next shipment.

Compatibility:

• TRP DHR Evo

• TRP Trail Evo

• TRP Slate Evo

• TRP Slate T4

Specifications:

• Manufactured in Germany

• Scope of delivery: (2 pieces)

• Replacement grub screw

• OAK sticker set

• 100% CNC machined

✔️ Improved ergonomics & performance

✔️ Custom-made bushings & spring incl.

✔️ CNC machined & robust brake lever

OAK performance - for your Shimano brake

Also suitable for gravity brakes from Shimano.

Experience the perfect combination of stability, rigidity, ergonomics and impressive craftsmanship.

Ergonomics for less fatigue:
Oaks engineers and team riders have worked intensively on the OAK SH brake lever and have surpassed the already good ergonomics of the original Shimano brake levers. Through numerous tests they have succeeded in developing a brake lever that reduces the strain on your hands. The unique Grip-Face surface offers optimal grip even when the hands are wet or sweaty. The shape of the lever wraps around your brake finger like a hook and prevents it from slipping out of your finger in extreme cases. The decisive difference to stay confident on the bike.

Stability and durability:
All OAK SH brake levers are milled from a high-strength aluminum alloy and offer excellent stability thanks to their well thought-out design.
The OAK SH brake lever is impressive and usually survives even heavy falls unscathed without bending or breaking. It is also easy to disassemble and service.

Increased rigidity for maximum performance:
You will feel the increased rigidity immediately when braking through a more direct power transmission, which makes the brake easier to control. You will love the control over your brakes!

Stronger torsion springs: Reduced pulling force and less noise
The OAK SH brake lever uses a stronger preload spring that securely preloads the lever in its starting position. This way it ensures that the lever stays in its defined position in the event of a hard landing or vibrations. The springs reduce the initial finger force required to operate the brake. Due to the reduced play and the stronger spring, the OAK SH brake lever returns to its starting position with less cushioning and therefore a little slower. This has no negative impact on your braking points, as the spring is completely relaxed when you release the lever. It only applies its force later on.

COMPATIBILITY

Shimano XTR M9120 - with OAK bearing bushings (included)

Shimano XTR M9100

Shimano XT M8100

Shimano Saint M820 - with OAK bearing bushings (included)

Shimano SLX M7100

Shimano Deore M6100

Shimano Zee M640

SCOPE OF DELIVERY

2x brake levers (anodised, colored)

2x SH adjustment screw (anodised, black)

2x SH Actuator (anodised, black)

4x OAK bearing bushing for Saint M820

5x OAK bearing bushing for XTR M9120

2x OAK torsion spring

1x assembly tool

1x 1.5 mm Allen key

2x OAK protective stickers for brake sensor

1x OAK sticker pack

MANUFACTURING AND MATERIAL

Made in Europe 

From aerospace aluminum 

100% CNC-milled 

OAK Root-Lever Pro brake lever suitable for MAGURA brake systems - set of 2 pieces.

The revolutionary brake lever upgrade for your MAGURA brake system impresses with its durability, adjustability, and advanced design.

Compatibility:  ALL MAGURA MT-

Next models:

·      MT8 (Raceline, Pro, SL, SLFM) 

·      MT7 (Pro & Raceline) 

·      MT6

·      MT5

·      MT4

·      MT Trail (Sport & Carbon) 

What’s included in the set: (2 pieces)

• Brake lever (anodized, Black, Silver or Lunar Grey)  Anti-kink sleeve (anodized, black) Adjusting screw CPA (anodized, black) Adjusting screw EPA (anodized, black) stainless steel spring double spring sleeve Individual sticker User manual and assembly instructions (1 piece) 1.5mm Allen key (1 piece) 

TECHONOLOGY

ALK (Advanced Lever Kinematics)

• Optimised lever ratios for maximum braking power with first-class controllability

CPA (Contact Point Adjustment)

• Tool-free adjustment of the pressure point using a CNC-milled adjusting screw. Fine adjustment through defined locking points in quarter-millimetre increments

EPA (Empty Path Adjustment)

• Tool-free fine tuning of the lever free travel, without return spring! The brake can be locked to prevent it from rolling away during maintenance work without an assembly stand

SBP (Superior Bend Protection)

• Reliable protection of the brake line through patented anti-kink protection 

100% CNC machined.

IF A SPECIFIC COLOUR IS SOLD OUT: Please contact us as we will reserve a pair in our next shipment.

6% more braking power

Grip Face Technology (GFT)

Stronger & lighter weight

OAK Performance - For your SRAM brake!
The wait is over. The OAK SR brake lever is here and takes your SRAM brake to a new level.

Increased rigidity for maximum performance:
The unique design around the filigree pockets enables the extremely rigid construction. You will feel this rigidity immediately when braking through a more direct power transmission, which makes the brake easier to control. Thanks to a higher mechanical gear ratio, your brakes will have 6% more power with the same finger force. You will love the significantly better control over your brake!

Ergonomics for less fatigue:
Oak's engineers and team riders have worked intensively on the ergonomics of the OAK SR brake lever. Through numerous tests they have succeeded in developing a brake lever that reduces the strain on your hands and reduces the dreaded arm pump.
The special OAK Grip Face technology in the brake finger creates noticeably more grip through the fine holes, even in wet conditions or in extreme situations. No matter what type of rider or braking habits - this lever is versatile and offers you confidence and reserves on long descents.

Stability and durability:
Oak Components brake levers are milled from solid material and offer outstanding stability thanks to their well thought-out shape. Thanks to our robust construction, they are extremely durable and impress even in the toughest racing conditions.

Appearance that impresses:
Not only functional, but also a visual highlight: The OAK SR Brake Levers massively enhance your brakes. The elegant and sporty design attracts attention and gives your bike an individual and high-quality look.

Experience the perfect combination of stability, rigidity, ergonomics and impressive appearance. Upgrade your SRAM brake system now with OAK SR Brake Levers and feel the difference on every ride!